Skip to content
  1. Services
  2. Events & Exhibitions
  3. Exhibition Stand and Booth Design & Build Service

Exhibition Stand and Booth Design & Build Service

Marafei designs and builds exhibition stands around the exhibitor's brand, participation goals and booked footprint. The project scope defines the drawings, fabrication, installation, handover and dismantling included, alongside the services supplied by the exhibitor or organiser.

Exhibition stand symbol in a blue circle

Give the stand a clear job

Choose what visitors should do: inspect a product, understand an initiative, try a demonstration or attend a meeting. Use that task to decide the aisle-facing message, the reception position and the space the exhibit needs.

A technology exhibitor might demonstrate one function before discussing its application. A public-sector team might introduce an initiative through a map and then explain a project. Agree the message and next step before approving the appearance, including what your team will count as an enquiry worth following up.

Walk two visitor routes before approving the layout

Trace both routes on the same scaled drawing. Rehearse them with team members, running the demonstration as a meeting guest arrives. Mark crossings that obstruct movement or hide the message.

A visitor approaching from the aisle

The visitor sees the message, reaches the host, watches a demonstration and leaves. Locate waiting space within the approved boundary and check whether the audience blocks the display for people approaching. Move the counter or shorten the demonstration if the route becomes congested.

A guest arriving for an appointment

The guest needs a visible meeting point and someone to direct them. Test access to the seat while a demonstration is underway, including the host's return to reception. Record layout changes before submitting the design for approval.

Match the exhibit and the open sides

A physical product needs dimensions, weights and handling arrangements reviewed by the relevant specialists. A software demonstration needs a viewing position and controls the host can operate. Meetings need an agreed number of seats and degree of privacy, with surrounding noise considered.

An inline booth generally presents one open face; a corner stand can face two aisles, subject to the booking. An island layout needs messages and hosting points suited to several approaches. Confirm the actual open sides and boundaries before placing any display or queue.

For a healthcare or pharmaceutical exhibitor, have the appropriate product team approve the demonstration and displayed claims. The Ministry of Health's record of CPHI Middle East 2024 provides a Saudi sector example, not approval for another exhibitor's materials. CPHI event record.

Shell scheme, space only and modular options

Read the booking contract and service schedule first. Shell scheme and space-only packages vary by event. The Gulf Print & Pack Saudi Arabia 2025 manual, for example, assigns provision within a space-only footprint to the exhibitor. Use your own show's current manual for decisions. Organiser's manual.

Option Check before design Resolve in the quote
Upgrade an organiser's shell scheme The walls, flooring, name panel and services actually included Permitted alterations, graphics, furniture and additions
Commission a custom stand on booked space Dimensions, open sides, service points and build rules Drawings, approvals, fabrication and installation responsibilities
Use modular components Fit on this footprint and the next intended layout Ownership or hire, storage and reassembly

Exhibition stand design addresses the exhibitor's space. If the commission also covers recruiting exhibitors, programming an event or operating the halls, define that wider work separately.

Plan for one show or repeat use

Conceptual corner stand: reception R, demonstration D, meeting M, storage S; solid walk-up route and dashed appointment route

Compare a bespoke build, modular components and trade show booth rental against your intended event schedule. Ask which pieces you retain after breakdown, which return to the supplier and which can accept new graphics. A different footprint or number of open sides can change what fits.

For hire, confirm availability, dimensions, branding options, condition, damage terms and return arrangements. For owned components, include packing, freight, storage and inspection before reuse. Better Stands encourages component reuse; confirm whether your event uses the programme and which requirements apply. No particular rating or saving follows from choosing a modular design. Better Stands.

The illustrative corner-stand plan places reception R, demonstration D, meeting M and storage S within the booked boundary, beside two aisles. A solid line marks the walk-up route and a dashed line the appointment route. It is a movement concept, not a scaled construction drawing; transfer both routes to the actual dimensions before approving the layout.

Branding, displays and meeting space

Supply cleared logos, copy, translations and product files. Agree print dimensions, materials and proofs, and review how the exhibitor's name reads from the approaches. Place storage where staff can retrieve materials without blocking visitors.

For a screen or interactive wall, specify the visitor task, equipment position and operating requirements. Test the content under representative hall lighting and noise. If the stand includes a dedicated immersive area, scope the digital room with its entry, exit and staffing requirements.

Set the privacy needed for meetings, then review seat orientation, partitions and audibility. A display wall or banner is one line item within the stand design; it needs to work with reception, demonstrations and circulation.

Approve more than the rendering

The rendering shows the proposed appearance. Review it alongside the scaled plan, elevations, service positions and material schedule. Reconcile the stand number, dimensions and open sides with the booking, and ask for any missing elements to be drawn.

Approve a print proof or finish sample when it affects the decision. Identify the drawing revision covered by the price, consolidate comments and close them before releasing fabrication under the required approvals. A later change to graphics or dimensions needs a recorded cost, schedule and approval impact.

Prepare your drawing and approval deadline.

Two examples of spatial sequencing and reuse

Saudi Arabia's pavilion at Expo 2025 Osaka

The Saudi Press Agency describes a route from an outer courtyard to an inner courtyard in the pavilion designed by Foster + Partners. It also documents cultural studios for visual arts and music. Pavilion design, cultural studios.

For a smaller Saudi trade-show booth, a proposed adaptation is a recognisable welcome point followed by one demonstration zone, with a meeting route beside it. Test whether both visitor groups find their destinations during the demonstration. The different scale and programme require a new layout; this is a test for your brief, not a reported result from Osaka.

Ypsomed's modular exhibition stand

Ypsomed reports reusing most of its stand structure, including flooring, furniture and signage elements, across exhibitions. The exhibitor's account.

For two planned shows with different footprints, ask the designer to place the retained components on both drawings and identify replacement graphics. After breakdown, reconcile the parts inventory with condition and storage records. Assess readiness for the second show and calculate your actual costs; the case does not establish a saving for another stand.

What determines a stand design and build quote?

Cost depends on the footprint, design, materials, exhibit and services required. Give competing providers the same drawing and exhibitor manual revision. Request separate entries for:

  • Design, revision rounds, drawings and the agreed approval work.
  • Fabrication, finishes, graphics, flooring, furniture and included equipment.
  • Packing, freight, site access, installation and pre-opening checks.
  • Agreed operation or support, followed by dismantling, removal, storage or returns.
  • Organiser and appointed-supplier charges, applicable taxes and who pays them.

If a quote offers a “complete package”, check its deliverables and exclusions, change rates, approval arrangements and validity. State the Saudi city and site-access dates as pricing inputs; proximity searches do not establish a contractor's availability or coverage for your show.

From drawing approval to move-out

Work backwards from opening through handover, rehearsal, installation, load-in, fabrication and drawing approval. For each stage, record the input the team needs and who can accept the completed work. Include the move-out window and removal responsibilities.

Work or service Name the responsible parties Completion evidence
Drawings and approval Preparer, reviewer and organiser submission owner Revision number and authorised response
Power and connectivity Ordering party, payer and inspecting specialist Order confirmation and supplied-service check
Furniture and equipment Supplier, payer and receiving person Item list, condition and operating check
Installation and handover Site lead and exhibitor representative Acceptance record with assigned open items
Breakdown, storage and returns Contractor, payer and custodian Exit record, inventory and delivery receipt

Name the responsible people in the table before sign-off. For an exhibitor based outside Saudi Arabia, identify who approves files remotely and who accepts the stand on site. Include cross-border freight and access credentials where they apply.

Accept the build, then assess the event

Compare the installed stand with the signed drawing. Rehearse the demonstration and meeting at the same time, recording each issue, owner, correction deadline and recheck.

Check Review on site Record
Dimensions and finishes Boundaries, elements and approved samples Differences and agreed corrections
Message and movement Reading from the aisle, entry, waiting and exit Obstructions or conflicting routes
Equipment and operation Content, controls, services and fallback Trial result and operating owner
Meetings and storage Access to seats and materials during a demo Privacy and usability findings

Count visits, completed demonstrations, meetings and qualified enquiries separately. Define a qualified enquiry before the show, such as a relevant requirement and an agreed next step. Technical acceptance alone does not establish commercial performance.

On-site operation and late requests

Name a shift lead, technical contact and change approver. Train the host to start and stop the demonstration and use an alternative explanation if equipment stops. Rehearse that switch before visitors arrive.

Changes to a logo, stand location or power point can affect approved work. Record the cost, timing and approval consequences before proceeding, including organiser review when required. Agree how staff will shorten demonstrations or manage waiting within the approved area when the stand becomes busy.

Event rules, safety and accessible movement

Have the relevant specialists review the actual manual for height, boundaries, rigging, power, flooring and material documentation. Do not carry dimensional limits from an earlier event into your design. The organiser and qualified teams confirm the requirements for the proposed installation, including fire protection. The Saudi Fire Protection Code SBC 801 is a general reference for that review.

Review approach, entry, floor transitions, circulation and viewing from seated and standing positions. Agree an alternative way to access essential information and test it with the site team. Keep exit routes and necessary services available under the applicable site requirements.

If a QR form or badge reader collects personal information, define the purpose, necessary fields, access, retention and follow-up process. Have the privacy lead review the actual processing against the Personal Data Protection Law. Selecting a capture tool does not settle those decisions.

Brief Marafei for a comparable proposal

Provide the show, venue, city, dates, stand number, plan, open sides, booking type and exhibitor manual. Add participation goals, exhibit dimensions and relevant weights, brand files, languages, target budget and drawing approval deadline.

Identify the services to include and the people who approve and accept them. Ask the exhibition stand and booth design & build company to specify drawings, materials, graphics, equipment, installation, support and breakdown within the agreed scope. Prepare a handover record with the drawing revision, item list, operating results, open issues, file rights, component ownership and custodian.

Discuss a stand for your Saudi exhibition.

Frequently asked questions

Define the footprint, opening date and services before comparing proposals.

What is included in exhibition stand design and build?

The proposal should list the concept, drawings, fabrication, graphics, installation, testing and breakdown it covers. Identify organiser and exhibitor services separately, with an ordering and payment owner for each.

How do we compare exhibition stand design and build companies?

Issue one brief with the same plan, manual and deadlines. Compare deliverables, approval responsibilities, materials, site services, handover, exclusions and change charges against it.

When should we consider bespoke modular exhibition stands?

Consider them against a repeat event schedule and the footprints you expect to book. Test component fit on those plans and compare rebranding, freight, storage, maintenance and reassembly costs.

When does trade show booth rental make sense?

It can suit a limited participation when available components fit the space and display task. Confirm stock, branding, condition, delivery, labour, damage terms and returns before comparing hire with ownership.

How should an island exhibition booth manage visitor flow?

Review the approaches visitors can actually use and place messages and hosts accordingly. Rehearse demonstration and meeting routes, keeping waiting and equipment within the approved layout.

How does a shell-scheme stand differ from a space-only booking?

A shell scheme provides the package specified by that organiser. Space only requires separate coordination of the build and services. Read your booking schedule for walls, floor, furniture and utility inclusions.

How do inline and corner booths affect the design?

An inline booth generally opens toward one aisle; a corner can open toward two. Confirm the booked configuration, then test message visibility and movement from each open approach.

What does an exhibition stand builder need in the initial brief?

Send the show, venue, dates, stand number, dimensions, open sides and current manual. Add exhibit details, approved artwork, objectives, budget, approval deadline and decision contacts.

What should we approve beyond an exhibition stand rendering?

Review scaled drawings, elevations, services, materials and necessary samples. Match them to the booking, record the approved revision and close comments before the agreed fabrication release.

Who submits exhibition booth drawings to the organiser?

Name the preparer, submission owner and follow-up contact in the scope. Retain the drawing revision and organiser's response, including any conditions that affect fabrication or installation.

What affects the price of a custom exhibition stand?

Footprint, complexity, finishes, graphics, equipment, logistics and installation conditions affect the scope. Request explicit venue charges, operation, breakdown, storage and applicable taxes alongside the build price.

Does a booth quote include power, internet and furniture?

Check each item against the organiser's package and contractor's schedule. Assign ordering, payment and receipt, including the service deadline and any appointed supplier requirements.

Can we hang a sign or screen above an exhibition booth?

Ask the organiser and qualified specialists to review the actual proposal. They confirm locations, loads, documentation and permitted suppliers before overhead work is included in an approved build.

How can we prevent a booth demonstration queue blocking the aisle?

Mark waiting, viewing and exit positions on the plan and rehearse them together. Agree how staff will limit or shorten demonstrations during busy periods within the approved area.

How can an exhibition stand accommodate more access needs?

Review approach, floor transitions, circulation and seated and standing views. Provide an agreed alternative for essential information and have site specialists check applicable requirements.

Can an existing exhibition booth fit a new footprint?

Inventory the retained components and condition, then place them on the new plan. Check the new event manual and price replacement parts, graphics, freight and labour before agreeing reuse.

When should exhibition stand fabrication start?

Work backwards from opening, load-in and approval deadlines. Agree drawings, materials and the revision to manufacture, then release production under the required approvals and project schedule.

What if the stand's location changes after design approval?

Compare dimensions, open sides and service positions. Record the revised work, cost and time, and obtain any necessary approvals before installing the changed layout.

What needs special attention in healthcare exhibition booth design?

Have the exhibitor's relevant teams clear product claims, graphics and demonstrations for the intended audience. Plan meetings and display operation around those approved materials and the actual event rules.

What files are needed for exhibition booth graphics?

Provide approved logos, copy and translations. Ask production for dimensions, material and proof requirements, and name the person who signs off each version before printing.

How should we scope an interactive exhibition booth display?

Define the visitor task, viewing position, equipment integration, services and operator. Test the complete demonstration and an alternative explanation for use if the display stops.

What belongs in a pre-opening exhibition stand inspection?

Compare the build to the signed plan and finishes. Check services, graphics, equipment, movement and meeting access, with an owner and recheck deadline for every open item.

Does stand construction pricing include move-out and storage?

Ask who dismantles, packs, removes, returns or stores each item. Record the venue's move-out window, charges, retained inventory and receipt arrangements in the scope.

How should we measure qualified enquiries at a trade show booth?

Define a qualifying need and next step before the show. Keep these counts separate from visits, meetings and technical acceptance; review personal-data collection and follow-up with the privacy lead.

Can an overseas exhibitor commission a stand in Saudi Arabia?

Artwork review and approvals can be arranged remotely. Confirm local site responsibilities, credentials, event rules, relevant cross-border freight and who attends the physical handover.

Who owns exhibition stand drawings, graphics and components?

Specify delivered file formats, editing and reuse rights, owned parts and rented items. Include tooling where relevant and name the custodian and person authorised to update graphics.

How should we handle last-minute exhibition booth requests?

Use one change approver and a site delivery contact. Record cost, timing and approval effects before work, and use the agreed operating fallback if the change cannot be delivered.

Sources and references

  1. Gulf Print & Pack Saudi Arabia 2025: space-only stand manual

    Informa

    Accessed:

  2. Better Stands programme

    Informa Markets

    Accessed:

  3. Saudi Pavilion at Expo Osaka 2025: courtyard design

    Saudi Press Agency

    Accessed:

  4. Saudi Pavilion at Expo Osaka: cultural studios

    Saudi Press Agency

    Accessed:

  5. Ypsomed: reusable exhibition stand components

    Ypsomed

    Accessed:

  6. Saudi Fire Protection Code SBC 801

    Saudi Building Code Center

    Accessed:

  7. Personal Data Protection Law

    SDAIA

    Accessed:

  8. CPHI Middle East 2024 event record

    Saudi Ministry of Health

    Accessed:

Publisher

Marafei

Publisher: Marafei

This service content was prepared, written and reviewed by Marafei’s team of specialists, consultants and technical engineers.

Marafei team

Don’t hesitate to
contact us.

You can book a demo with us by filling out this information, and we will get in touch with you as soon as possible

Business Hours

Sunday–Thursday
8:00 AM–6:00 PM